CPD-25 vs CPD-30
Two sizes of the same frame. The difference that decides the order is usually aisle width or the weight of a full pallet — not the number on the plate.
| CPD-25 | CPD-30 | |
|---|---|---|
| Model | CPD-25 | CPD-30 |
| Rated capacity | 2.5 t | 3 t |
| Lift height | [object Object] | [object Object] |
| capacity | 0.5 t | 0.5 t |
| standard | ||
| power | Electric | Electric |
Rows that differ are marked. Rows without a mark are identical on both builds.
Choose CPD-25 when
Four-wheel, 2.5 t. For loads that sit between pallet and stillage. Frequently chosen where a 2.0 t truck is marginal on residual capacity at height.
The building is the constraint: floor loading, door width, or a mezzanine that will not take the heavier chassis. CPD-25 is also the cheaper unit, so a fleet that never loads to the plate should not pay for the frame it does not use.
CPD-25 specificationChoose CPD-30 when
Four-wheel, 3.0 t. The smallest truck in the range that comfortably handles a 1,200 mm pallet at a 600 mm load centre without derating.
The load is the constraint: pallets that arrive over-weight, attachments that shift the centre of gravity forward, or a mast tall enough that residual capacity falls away at height. Buying one size up is cheaper than a second handling step.
CPD-30 specificationSi no sabe cuál
Send the aisle width, the load and the lift height. We answer with the model and the reason, not both brochures.